Virginia Total-Loss Threshold Law

Virginia uses a 75% simple percentage threshold to decide when a damaged vehicle must be declared a total loss instead of repaired.

This guide organizes publicly available information for general education. It is not legal advice and does not replace your policy, your state's law, or a licensed professional's review of your specific situation. See how this guide was researched.

The rule in Virginia

Virginia uses a 75% simple percentage threshold to decide when a damaged vehicle must be declared a total loss. Once estimated repair cost reaches 75% of the vehicle's actual cash value (ACV), state law treats it as a total loss — regardless of what the vehicle's salvage value would be.

Worked example — a $10,000.00 vehicle:

Repair estimate: $7,500.00 (75% of $10,000.00). On a $10,000.00 vehicle, repair costs reaching $7,500.00 (75% of ACV) meet Virginia's total-loss threshold.

What this means practically

75% is the single most common state threshold nationally, and Virginia uses it — roughly three-quarters of the vehicle's actual cash value in repair costs triggers a total loss.

How Virginia compares nationally

Of the 29 jurisdictions that use a fixed percentage, 7 set a lower bar than Virginia's 75%, 16 use the same 75%, and 5 set a higher one. Another 22 use the Total Loss Formula instead of any percentage.

Virginia vs. bordering states

Total-loss rules in states bordering Virginia
StateRuleCompared with Virginia
Virginia75% of ACV—
Kentucky 75% of ACV Same rule
Maryland 75% of ACV Same rule
North Carolina 75% of ACV Same rule
Tennessee 75% of ACV Same rule
West Virginia 75% of ACV Same rule
Washington, D.C. 75% of ACV Same rule

Every state bordering Virginia uses the same rule, so crossing the state line doesn't change the total-loss test.

Who regulates total losses in Virginia

Total-loss rules are enforced by Virginia's insurance regulator. If you think your insurer applied the wrong threshold or undervalued your vehicle, you can file a consumer complaint there. Find the department's contact details in the NAIC directory of state insurance departments, and see how to file a complaint with your state insurance department.

Check your own numbers

The Total-Loss Threshold Checker has Virginia pre-selected from this link — enter your own repair estimate and ACV to see how they compare.

What this page can't tell you

It can't tell you Virginia's threshold with legal certainty — this reflects one compiled secondary review as of mid-2026, not a direct reading of the state's current statute or administrative code, and state rules can change. It also can't tell you what your specific vehicle's ACV or salvage value actually is; for that, see How Insurers Value a Total-Loss Vehicle and run your own numbers through the Total-Loss Offer Audit calculator.

Frequently Asked Questions

What is the total-loss threshold in Virginia?

Virginia uses a 75% simple percentage threshold: if estimated repair cost reaches 75% of the vehicle's actual cash value (ACV), state law treats it as a total loss.

Does Virginia use a percentage rule or the Total Loss Formula?

A percentage rule — specifically 75% of ACV. Some neighboring states use the Total Loss Formula instead, so the same repair estimate can produce a different result just across a state line.

Is this the exact test my insurer will use?

It's the state-law minimum, compiled from a secondary source and one example state regulator's published methodology — not a live read of the current statute, and not necessarily identical to your insurer's own internal total-loss policy, which can be more (but not less) generous. Confirm the current rule with your state insurance department if it matters to your claim.

Sources

  • Brennan, R., "Total Loss Threshold by State," Policygenius, updated July 2026 — the same secondary compilation cited in the companion guide and calculator. Treat as a starting point, not a final legal citation; confirm your own state's current rule with your state insurance department.
  • New Hampshire Insurance Department, List of Accepted Valuation Methods for Total Loss — a real example of a state regulator publishing its own accepted methodology.

Every source above is also tracked in the site's public source register. Spot an error or an outdated citation? Use the corrections page.

Related Tools & Guides